uv-dtf-operation-guide

3D Raised Logo Artwork Guide: White, CMYK and Varnish Layer Setup

A 3D raised-logo file should not be treated as one flat image.

3D Raised Logo Heat Transfer Guide for T-Shirts, Hoodies, Caps & Jerseys

Printing a good 3D raised logo is only half of the job.

3D Raised Logo Printing Troubleshooting: White Ink, UV Curing, Registration & Varnish

A 3D raised logo can fail before it ever reaches the heat press.

3D Raised UV-DTF Logo vs Silicone Patch vs Embroidery: Which Fits Your Apparel Branding?

A 3D raised UV-DTF logo, a molded silicone patch and embroidery can all create dimensional branding on clothing, but the three methods are b...

3D Raised Logo vs UV DTF Crystal Label: Ink, Film, Transfer Method & Applications

A UV DTF crystal label and a 3D raised apparel logo may be produced from a similar UV printing platform, but they are not the same transfer ...

A3-UV_DTF-HS

How to Make 3D Raised Logos with a UV DTF Printer: Complete Workflow

A 3D raised apparel logo is created by building physical height with repeated white UV ink layers, adding the visible CMYK artwork and varni...

How White Ink Layers Create 3D Raised Effects in UV DTF Printing

In a standard UV printing workflow, white ink is usually treated as an underbase. Its main job is to block the color of the substrate and pr...