knowledge
9 articles in the knowledge category.
knowledge3D Raised Logo Artwork Guide: White, CMYK and Varnish Layer Setup
A 3D raised-logo file should not be treated as one flat image.
knowledge3D Raised Logo Heat Transfer Guide for T-Shirts, Hoodies, Caps & Jerseys
Printing a good 3D raised logo is only half of the job.
knowledge3D Raised Logo Printing Troubleshooting: White Ink, UV Curing, Registration & Varnish
A 3D raised logo can fail before it ever reaches the heat press.
knowledge3D Raised UV-DTF Logo vs Silicone Patch vs Embroidery: Which Fits Your Apparel Branding?
A 3D raised UV-DTF logo, a molded silicone patch and embroidery can all create dimensional branding on clothing, but the three methods are b...
knowledge3D Raised Logo vs UV DTF Crystal Label: Ink, Film, Transfer Method & Applications
A UV DTF crystal label and a 3D raised apparel logo may be produced from a similar UV printing platform, but they are not the same transfer ...
solutionUV Printing on Metal: Process, Best Metal Types, Surface Preparation & Applications
UV printing makes it possible to print full-color graphics, white ink and varnish effects directly onto many suitable metal surfaces, includ...
knowledgeHow Temperature & Humidity Affect DTF Printing
A DTF printer can use the same ink, PET film, powder and RIP settings two days in a row—and still behave differently if the room environment...
knowledgeHow to Make 3D Raised Logos with a UV DTF Printer: Complete Workflow
A 3D raised apparel logo is created by building physical height with repeated white UV ink layers, adding the visible CMYK artwork and varni...
knowledgeHow White Ink Layers Create 3D Raised Effects in UV DTF Printing
In a standard UV printing workflow, white ink is usually treated as an underbase. Its main job is to block the color of the substrate and pr...